Farkles - Round One & Two
49 images in this album on 2 pages.
[Slideshow] [Login]
Gallery: dougc Riding Gallery #2 navigate UP (accesskey 'U')
   
 leftdot 1  leftdot 2  rightdot
Next Page (Accesskey 'N') Last Page (Accesskey 'L')
Added CB +3wide/+2taller windscreen, fuel cell, top box, foot guards, bar-ends, mokos, togs, shelf, mag-knight, HIDs, etc.
Overall view with new screen, fuel cell, and mounted top box from driver's left side.
(PA270111.JPG)
Overall view with new screen, fuel cell, and mounted top box from driver's left side.
(PA270111.JPG)
Viewed: 1330 times.
Same view as at left just a little closer.
(PA270112.JPG)
Same view as at left just a little closer.
(PA270112.JPG)
Viewed: 1216 times.
Rider's right side photo. 
(PA270113.JPG)
Rider's right side photo.
(PA270113.JPG)
Viewed: 1248 times.
Same photo slightly lower angle. (PA270114.JPG)
Same photo slightly lower angle. (PA270114.JPG)
Viewed: 1082 times.
Close up of fuel cell with top box mounted.  From this photo you can see that box is centered over rear axle.
(PA270115.JPG)
Close up of fuel cell with top box mounted. From this photo you can see that box is centered over rear axle.
(PA270115.JPG)
Viewed: 1644 times.
Ass end view of bike illustrates height of box well.  I need to measure height against a box mounted on a Givi rack.
(PA270116-2.jpg)
Ass end view of bike illustrates height of box well. I need to measure height against a box mounted on a Givi rack.
(PA270116-2.jpg)
Viewed: 1232 times.
Rear quarter view of fuel cell and box set up.  I will attempt to paint and color match the box to the new bike this weekend.
(PA270117-2.jpg)
Rear quarter view of fuel cell and box set up. I will attempt to paint and color match the box to the new bike this weekend.
(PA270117-2.jpg)
Viewed: 1316 times.
Same view as previous.  Will post more pictures after painting the box lid.
(PA270117.JPG)
Same view as previous. Will post more pictures after painting the box lid.
(PA270117.JPG)
Viewed: 1196 times.
Left side view of top box and mounting.  Handling is improved over stock mounting. 
(PA270118.JPG)
Left side view of top box and mounting. Handling is improved over stock mounting.
(PA270118.JPG)
Viewed: 1077 times.
I just have to figure out where to mount a jug or camelback for LD riding hydration.
(PA270119.JPG)
I just have to figure out where to mount a jug or camelback for LD riding hydration.
(PA270119.JPG)
Viewed: 1100 times.
Head on view.  Windscreen is nice and Hella's put the light far down the road and light up a good portion of the shoulder as well.
(PA270130.JPG)
Head on view. Windscreen is nice and Hella's put the light far down the road and light up a good portion of the shoulder as well.
(PA270130.JPG)
Viewed: 1222 times.
Dash view showing GPS and radar detector mounting.  Datel voltmeter can be see as well as Sigma cyclometer. (PA270131.JPG)
Dash view showing GPS and radar detector mounting. Datel voltmeter can be see as well as Sigma cyclometer. (PA270131.JPG)
Viewed: 1340 times.
Left side view.  Switch gear for Hella's is visible as is Mag-Knight tank protection. 
(PA270132.JPG)
Left side view. Switch gear for Hella's is visible as is Mag-Knight tank protection.
(PA270132.JPG)
Viewed: 1208 times.
Rear view of Tanji cell and mounted Givi.  Additional red reflectors added. 
(PA270133-2.jpg)
Rear view of Tanji cell and mounted Givi. Additional red reflectors added.
(PA270133-2.jpg)
Viewed: 1178 times.
E460 removed to show fabricated mount.
(PA270134-2.jpg)
E460 removed to show fabricated mount.
(PA270134-2.jpg)
Viewed: 1236 times.
Rear view showing flat bar attachement points.
(PA270135.JPG)
Rear view showing flat bar attachement points.
(PA270135.JPG)
Viewed: 1069 times.
Give mount from all angles. 
(PA270136-2.jpg)
Give mount from all angles.
(PA270136-2.jpg)
Viewed: 1145 times.
Givi universal mount removed to show tapped holes where mount is bolted to aluminum flat bar.
(PA270137.JPG)
Givi universal mount removed to show tapped holes where mount is bolted to aluminum flat bar.
(PA270137.JPG)
Viewed: 989 times.
Mounting plate attached to flatbar shown with stainless hardware used to bolt universal mount to fuel cell. (PA270138.JPG)
Mounting plate attached to flatbar shown with stainless hardware used to bolt universal mount to fuel cell. (PA270138.JPG)
Viewed: 998 times.
E460 and mount removed to show "flat bed" FJR. 
(PA270139-2.jpg)
E460 and mount removed to show "flat bed" FJR.
(PA270139-2.jpg)
Viewed: 1066 times.
The welds on the Dean Tanji fuel cell are impeccable and handling, even loaded with an E460, is better than on the stock Givi rack.
(PA270140.JPG)
The welds on the Dean Tanji fuel cell are impeccable and handling, even loaded with an E460, is better than on the stock Givi rack.
(PA270140.JPG)
Viewed: 1126 times.
Much less wind buffeting than when case is mounted in stock location. (PA270141.JPG)
Much less wind buffeting than when case is mounted in stock location. (PA270141.JPG)
Viewed: 1190 times.
Another view of Tean Tanji fuel cell, my flatbed FJR. 
(PA270142.JPG)
Another view of Tean Tanji fuel cell, my flatbed FJR.
(PA270142.JPG)
Viewed: 1077 times.
Angled photo of entire bike. (PA270143.JPG)
Angled photo of entire bike. (PA270143.JPG)
Viewed: 1007 times.
In testing, 3 full cases of canned beer was carried without problem.
(PA270144.JPG)
In testing, 3 full cases of canned beer was carried without problem.
(PA270144.JPG)
Viewed: 1073 times.
PB080147-2.jpg
PB080147-2.jpg
Viewed: 1133 times.
PB080148-2.jpg
PB080148-2.jpg
Viewed: 1057 times.
PB080149-2.jpg
PB080149-2.jpg
Viewed: 1000 times.
   
 leftdot 1  leftdot 2  rightdot
Next Page (Accesskey 'N') Last Page (Accesskey 'L')
Gallery: dougc Riding Gallery #2 navigate UP (accesskey 'U')
Powered by Gallery v1 [RSS]